Redline GTi

cappa-wpn

Powered_by_Suzuki wrote:
cappa-wpn wrote:
Got nothing
You are correct in that remark

Yeah Thats it bloke

cappa-wpn

Ohh look who it is...

Only shows up on redline when he has to write smart ass comments
Nice...

Got nothing to proove

My car runs makes power I'm happy dont really care what anyone thinks

cappa-wpn

:lol: straps lol if only you new any way this is a post about blocks not block heads :lol: No point arguing One day when you come to Melbourne to show off your (rabi habib #2) at autosalon Send me a pm I'll bring mine out and blow your fkn doors off I'll show how a quick gti goes.. not a dyno queen...

cappa-wpn

:lol: straps lol if only you new any way this is a post about blocks not block heads :lol: Yeah a post about a tight assed swift owners block that looks pathetic Youre going backwards Going 40psi (What for like one dyno run?) And then turn it back down to like 15psi for autosalon tune please do it....

cappa-wpn

pictureshowman wrote:Does it have rectangle exhaust ports?

Not sure
But I know cinos are rectangle

cappa-wpn

[YLD80Y] wrote:
cappa-wpn wrote: Theres one on eBay for $169
You sure that's for a G13BA?

It says it's for a g13b sohc
What other 1.3 sohc is there?
If it's not the right one I'll just have to weld one up

cappa-wpn

LUN81C wrote:Also have custom made billet main caps being made if this motor works I can see it doing 330 kw at wheels with 40 psi jammed in it

Yeah jam it in!! Do it lol
Just loosen the straps on the dyno a little more and you'll make it without any more boost

You raced any big powered cars yet

cappa-wpn

pictureshowman wrote:I think the Exhaust manifold is the big blocker.

Theres one on eBay for $169

cappa-wpn

Is there a turbo kit out there for a cino 1.3L sohc
I'm looking to do a quick Turbo kit on a cino and was gonna see if someone has one before I start to make one up

cappa-wpn

I think it still looks like a swift has had sex with an xl and this is the love child Not a fan of the look but it's what is needed for the areo with the lowest drag. Bonnet and guards look banga But... The front bar... I dont think I'd bring the car out of the garage lol Even the veilside bar look...

cappa-wpn

:mrgreen: :lol: I really get you going dont I cappa mate please put your dyno sheet up then you can torque and walk like I can 70kw and more torque [-X :^o Nehh I really dont care bout dyno charts mate I got over that a while ago cbf prooving anything I'll let You have all the internet fame and glo...

cappa-wpn

When your playing with the big boys and punching 730 nm of torque you have to push the limits and unless you been there done that with a g13b then you know what pushing limits mean :D Pleaseeee don't start with torque I made more torque with like 70kw less than you Thats not really a banga torque f...

cappa-wpn

Turbo vit wrote:I can't use the 13b because it's going into a vitara and I have a second block in good condition the first one was overheated and has a large crack in the head aswell the new one was treated nicely all it's life and has no problems

Your wasting your time

cappa-wpn

I'm doing up the g16b and am using g13b forged rods everything else is g16b components I wouldn't waste my time turbocharging the g16 motor That crack you have now, you will get used to that sight They're nothing like the gti motors You'd think being a closed deck block that it Would be great and b...

cappa-wpn

LUN81C wrote:a g13b fully closed deck

I seee

cappa-wpn

LUN81C wrote: what block guard

What in the f**k is that

cappa-wpn

Not being smart or anything but theyre cheaper from modena Are you negotiable on price or willing to go lower than new price Good luck buying a diff from Modena. I bought this one when a batch of 10 were made. Price is not negotiable. This is a top quality brand new diff never used. I can get one o...

cappa-wpn

Not being smart or anything but theyre cheaper from modena
Are you negotiable on price or willing to go lower than new price

cappa-wpn

Guys, I have a daily hack/runaround project that I would like to improve a bit...so Im after suggestions on alternate car steel wheels preferably in 15 inch but might use 14's that would suit the swift. Interceptor style would be great if they exist (round holes). So what do you know of that would ...

cappa-wpn

1600GTI wrote:
Pauly wrote:When did this place turn into boostcruising?
When you signed up.

cappa-wpn

LUN81C wrote:That my friend will stay my secret

Alright this guy..
1008 duration 1000000mm lift

Theres no need to keep it a secret
It's not like anyone will copy you or something

cappa-wpn

LUN81C wrote:Cam shafts make big difference mine are monster cams as you can see its not happy down low

Profile?

cappa-wpn

SOBIL wrote:Pics or it didn't happen :p

Yeah it happened
Yeah there was only 4 but it was enough to still have a good day

cappa-wpn

currently building a new motor and have given the grout method a try but I have placed the grout almost at the top deck of the block similar as a block guard would fit in They mainly do that in drag cars because cooling is not much of an issue for a quick squirt down the quarter But for zuboo this ...

cappa-wpn

Hi everyone. Looking forward to tomorrow. Please remember to wash the car and bring at least 2 liters of water. Nepean HWY will be blocked Nth bound from Frankson to Stkilda. We will be OK on our course See you tomorrow 9AM Regards George Mob: 0409 141 998 See you there George I'll be bringing the ...

cappa-wpn

trial1505 wrote:Can i use a small turbo td04l and run 6-7 psi without an intercooler.Stock gti block...?I do have an oil cooler kit to use.

Yes you can

You don't need an intercooler or oil cooler

cappa-wpn

Tassie_mk1 wrote:You can also buy them direct from Hotbits which I run, but they are fronts only as therearof a gti is not a macpherson style strut. But likei said, its been covered plenty of times

They do actually do the back
They do the rear shock and adjustable spring

cappa-wpn

Hmm
So why purchasing something that broke the first time?

cappa-wpn

I've lately been put off striders carbon fibre products
The clear starts to become very smokey and doesn't look like carbon anymore
I noticed it the other day on my quick swift when washing it

cappa-wpn

Thought your motor already had one

cappa-wpn

Sounds good George I'll be there with my new little weapon

I'll bring a few other gti boys too

Hope a we can get a fair few guys this time..

cappa-wpn

Some nice turbo power curves achieved here with good engine development. I always thought of turbo lag as from steady state throttle to snapping it open, what latency there is in response of turbo spool, not just the power curve at wot. Not something normally measured on a dyno. Great improvements ...

cappa-wpn

hi all im wonderng if there is a car that has a rim that is a direct replacement to the swifts stock rims that will be able to fill in some of the wheel arch without lowering the car to much and also have a wider tire on it. im going for a rough look to my car and like the look of steelies but livi...

cappa-wpn

Hes literally copied Suzitech new strut braces

cappa-wpn

sorry for my english i have swift 1.3 with g13bb engine (sohc, 16 valve, 62kw) when engine is hot and accelerating out of my head I hear crackling and I have a consumption of oil and a lot of smoke from the exhaust . I need to repair or replace the head . I'm interested in what head band on my engi...

cappa-wpn

sorry for my english i have swift 1.3 with g13bb engine (sohc, 16 valve, 62kw) when engine is hot and accelerating out of my head I hear crackling and I have a consumption of oil and a lot of smoke from the exhaust . I need to repair or replace the head . I'm interested in what head band on my engi...

cappa-wpn

can mint be slightly damaged? or can something which is slightly damaged be described as mint. Your posting ability appears to be working. you cant upload photos from an exterior account. Must be uploaded through the site. still not sure about damaged mint items? GTP I'm selling a gti It's faded bu...

cappa-wpn

Who told you ignis sport gearbox has 3.9?? I have an ignis sport gearbox it's got roughly 4.1 ratio Like yldboy said You will fall out or your power band I had this problem years ago Because I ran a bit turbo Everytime I shifted I fell out of the boost range and had to come on boost again every gear...

cappa-wpn

[YLD80Y] wrote:
Zuboo wrote:Vmx 80 i have found the best value for money quality wise
VMX80 with a plate LSD?

Yeah I used vmx80 for years
Worked fine with the lsd
But like zuboo said it's good value for $$, but if you can afford it go better
Ever since I went better I havnt smashed a gearbox yet.....

cappa-wpn

Its 80W/90 GL-5 Synthetic gear oil Thanks Neil! I've been waiting for an answer here as well. A few other threads were suggesting the Castrol LSX90(?) Kind of curious as to what else would go well in a mainly street driven car with a Suzuki Sport plate LSD. Pros? Cons? Clunkiness and noise? Cheers,...

cappa-wpn

Pauly: unsure on what CR to run still in 2 minds: first forge everything and run standard CR 11:1 with 'blueprint' engine or 2nd forge the lot and go 1.8lt and 'blueprint' and CR around 7.5-8.5:1 for more boost. end of the day goal is 200KW @ wheels. If your goal is 200kw don't run anything under 9...

cappa-wpn

Doesn't a mk1 from factory with full interior weigh 680-750kg

cappa-wpn

the motor is already pulled out of the GTI and ready to take to the welders tomorrow to see what he says, if he cant weld it ill see if we could make up an adapter type thing and maybe that will work :) Looks to me like you didn't have the two bolts that go into the Gearbox Most common mistake when...

cappa-wpn

LUN81C wrote:Weres cappa he loves to talk about torque

Torque...

You can't handle my torque lol

cappa-wpn

Item Description:
I'm looking for a turbo manifold for a gti motor
Needs to have an external gate flange
Just for a budget build I'm doing

Price Range:
give me a price

Contact Details:
Pm please

cappa-wpn

Damn...
Was that roller door open to that factory on the right

Did the news even tell people a monster storm was coming?

cappa-wpn

sMaShEdUpSaNiTy wrote:https://www.youtube.com/watch?v=bpOeA7hrJD4

My GTi turning into a Golf (ball)

I dont get it...
You just sat there and watched your gti get destroyed by hail?

cappa-wpn

very interested in a set of option #2 Maybe even two sets depending on price How much Would I be looking at per set if I bought 2 Item Description: Wilwood Big Brake Upgrade kit Option 1 Wilwood 4 spot calipers 282 Slotted RDA rotors, redrilled to suit swift Custom Billet Caliper adapters with mount...

cappa-wpn

fOokah wrote:is there a setup to suit the stock 14in rims?

Thanks

Ditch those damn stockies Hahahaha

cappa-wpn

Problem could also be a loose gudgeon pin or one of the big ends has let go. Yeah I'm hoping it's not this, but it is on the list- I just left it out in the hope its not that [-o< Did he touch the motor since the car last ran All I did to the internals since it last ran was fill them with good oil....

Search found 769 matches